A437/A437M-01a
|
高温用经特殊处理的涡轮型合金钢螺栓材料
|
Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
|
A439-83(1999)
|
奥氏体可锻铸铁铸件
|
Standard Specification for Austenitic Ductile Iron Castings
|
A447/A447M-93(2003)
|
高温用镍铬铁合金钢铸件(25-12级)
|
Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
|
A449-04a
|
经淬火和回火的钢螺栓和螺柱
|
Standard Specification for Quenched and Tempered Steel Bolts and Studs
|
A450/A450M-04
|
碳素钢管、铁素体合金钢管及奥氏体合金钢管
|
Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
|
A451/A451M-02
|
高温用离心铸造的奥氏体钢管
|
Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
|
A453/A453M-03
|
具有同奥氏体钢相类似的膨胀系数、屈服强度为50-120Ksi(345-827MPa)的耐高温螺栓材料
|
Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
|
A455/A455M-03
|
压力容器用高强度碳锰钢板
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
|
A456/A456M-99(2003)
|
大型曲轴锻件的磁粉检查
|
Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
|
A459-97(2003)
|
镀锌平轧扁钢铠装带
|
Standard Specification for Zinc-Coated Flat Steel Armoring Tape
|
A460-94(2004)e1
|
包铜钢丝绳标准
|
Standard Specification for Copper-Clad Steel Wire Strand
|
A463/A463M-02a
|
热浸镀铝薄钢板
|
Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
|
A466/A466M-01
|
非焊接碳素钢链
|
Standard Specification for Weldless Chain
|
A467/A467M-01
|
机器链和盘旋链
|
Standard Specification for Machine and Coil Chain
|
A469-04
|
用于发电机转子的真空处理钢锻件
|
Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
|
A470-03
|
涡轮机转子和轴用经真空处理的碳素钢和合金锻件
|
Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
|
A471-02
|
涡轮转子转盘和转轮用真空处理合金钢锻件技术规范
|
Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
|
A472-98(2003)
|
蒸汽涡轮机轴及转子锻件的热稳定性的试验方法
|
Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
|
A473-01
|
不锈和耐热钢锻件
|
Standard Specification for Stainless Steel Forgings
|
A474-03
|
包铝钢丝绳标准
|
Standard Specification for Aluminum-Coated Steel Wire Strand
|
A475-03
|
镀锌钢丝绳
|
Standard Specification for Zinc-Coated Steel Wire Strand
|
A476/A476M-00
|
造纸厂干燥辊用球墨可锻铸铁件
|
Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
|
A478-97(2002)
|
铬镍不锈钢和耐热钢制编织钢丝
|
Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
|
A479/A479M-04
|
锅炉及压力容器用不锈钢和耐热钢棒与型材
|
Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
|
A480/A480M-04
|
扁平轧制耐热不锈钢厚板材、薄板材和带材通用要求
|
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
A481-94(2000)
|
金属铬
|
Standard Specification for Chromium Metal
|
A482-93(2000)
|
铬铁硅
|
Standard Specification for Ferrochrome-Silicon
|
A483-64(2000)
|
硅锰合金
|
Standard Specification for Silicomanganese
|
A484/A484M-03a
|
不锈及耐热锻钢棒,钢坯及锻件的规格
|
Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
|
A485-03
|
高淬透性耐磨轴承钢的技术规范
|
Standard Specification for High Hardenability Antifriction Bearing Steel
|
A487/A487M-93(1998)
|
受压钢铸件
|
Standard Specification for Steel Castings Suitable for Pressure Service
|
A488/A488M-01e1
|
钢铸件焊接规程和工作人员的合格鉴定
|
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
|
A489-04
|
碳素钢吊耳
|
Standard Specification for Carbon Steel Lifting Eyes
|
A490M-04a
|
最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓
|
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
|
A490-04a
|
最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓
|
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
|
A491-03
|
镀铝钢链环栏栅结构
|
Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
|
A492-95(2000)
|
耐热不锈钢丝绳
|
Standard Specification for Stainless Steel Rope Wire
|
A493-95(2000)
|
冷镦和冷锻不锈钢和耐热钢丝
|
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
|
A494/A494M-03ae1
|
镍和镍合金铸件
|
Standard Specification for Castings, Nickel and Nickel Alloy
|
A495-94(2000)
|
硅钙合金钢技术规范
|
Standard Specification for Calcium-Silicon Alloys
|
A496-02
|
钢筋混凝土用变形钢丝
|
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
|
A497/A497M-02
|
钢筋混凝土用焊接变形钢丝网
|
Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
|
A498-04
|
无缝与焊接碳素钢,铁素体钢与奥氏体钢制有整体散热片的换热器钢管
|
Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
|
A499-89(2002)
|
轧制丁字钢轨用的碳素钢棒材及型材的技术规范
|
Standard Specification for Steel Bars and Shapes, Carbon Rolled from T Rails
|
A500-03a
|
圆形与异型焊接与无缝碳素钢结构管
|
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
|
A501-01
|
热成型焊接与无缝碳素钢结构管
|
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
|
A502-03
|
结构钢铆钉规范
|
Standard Specification for Rivets, Steel, Structural
|
A503/A503M-01(2001)e1
|
锻制大型曲轴的超声波检验
|
Standard Specification for Ultrasonic Examination of Forged Crankshafts
|
A504-04e1
|
锻制碳素钢轮
|
Standard Specification for Wrought Carbon Steel Wheels
|
A505-00
|
热轧和冷轧合金钢薄板和带材
|
Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
|
A506-04
|
正规质量及优质结构的热轧和冷轧合金钢薄板与带材
|
Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
|
A507-04
|
优质拉拔,热轧和冷轧合金钢薄板与带材
|
Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
|
A508/A508M-04b
|
压力容器用经回火和淬火真空处理的碳素钢与合金钢锻件
|
Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
|
A510-03
|
碳素钢盘条和粗圆钢丝通用要求
|
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
|
A510M-03
|
碳素钢盘条和粗圆钢丝通用要求
|
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
|
A511-04
|
无缝不锈钢机械管
|
Standard Specification for Seamless Stainless Steel Mechanical Tubing
|
A512-96(2001)
|
冷拉对缝焊碳素钢机械管
|
Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
|
A513-00
|
电阻焊碳素钢与合金钢机械钢管
|
Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
|
A514/A514M-00a
|
焊接用经回火与淬火的高屈服强度合金钢板
|
Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
|
A515/A515M-03
|
中温及高温压力容器用碳素钢板
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
|
A516/A516M-04
|
中温及低温压力容器用碳素钢板
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
|
A517/A517M-93(1999)
|
压力容器用经回火与淬火的高强度合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
|
A518/A518M-99(2003)
|
耐蚀高硅铁铸件
|
Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
|
A519-03
|
无缝碳素钢与合金钢机械管
|
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
|
A521-03
|
一般工业用闭式模钢锻件
|
Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
|
A522/A522M-01
|
低温用锻制或轧制含镍8%和9%的合金钢法兰,配件,阀门和零件规格
|
Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
|
A523-96(2001)
|
高压管型电缆线路用平端无缝与电阻焊钢管
|
Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
|
A524-96(2001)
|
常温和低温用无缝碳素钢管
|
Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
|
A529/A529M-04
|
高强度碳锰结构钢质量
|
Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
|
A530/A530M-04
|
特种碳素钢和合金钢管
|
Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
|
A531/A531M-91(2001)
|
涡轮发电机钢定位环的超声波检验
|
Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
|
A532/A532M-93a(2003)
|
耐磨铸铁
|
Standard Specification for Abrasion-Resistant Cast Irons
|
A533/A533M-93(1999)
|
压力容器用经回火和淬火的锰钼及锰钼镍合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
|
A534-04
|
用于耐摩擦轴承的渗碳钢
|
Standard Specification for Carburizing Steels for Anti-Friction Bearings
|
A536-84(1999)e1
|
球墨铸铁件
|
Standard Specification for Ductile Iron Castings
|
A537/A537M-95(2000)
|
压力容器用经热处理的碳锰硅钢板
|
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
|
A540/A540M-04
|
特殊用途的合金钢螺栓材料
|
Standard Specification for Alloy-Steel Bolting Materials for Special Applications
|
A541/A541M-04
|
压力容器部件用经淬火和回火的碳素钢及合金钢锻件
|
Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
|
A542/A542M-99e1
|
压力容器用经回火和淬火的铬钼、铬钼钒及铬钼钒钛硼合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
|
A543/A543M-93(1999)
|
压力容器用经回火和淬火的镍铬钼合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
|
A550-78(2000)
|
铌铁合金
|
Standard Specification for Ferrocolumbium
|
A551-94(1999)
|
钢轮箍
|
Standard Specification for Steel Tires
|
A553/A553M-95(2000)
|
压力容器用经回火和淬火的含8%及9%镍的合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
|
A554-03
|
焊接的无缝钢机械管
|
Standard Specification for Welded Stainless Steel Mechanical Tubing
|
A555/A555M-97(2002)
|
耐热不锈钢丝和盘条的通用要求
|
Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
|
A556/A556M-96(2001)
|
无缝冷拉碳素钢给水加热器管
|
Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
|
A560/A560M-93(1998)
|
铬镍合金铸件
|
Standard Specification for Castings, Chromium-Nickel Alloy
|
A561-71(1999)
|
工具钢棒的宏观刻蚀试验
|
Standard Recommended Practice for Macrotech Testing of Tool Steel Bars
|
A562/A562M-90(2001)
|
搪玻璃或扩散金属镀层的压力容器用锰钛合金碳素钢板
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
|
A563-04a
|
碳合金钢螺母
|
Standard Specification for Carbon and Alloy Steel Nuts
|
A563M-04
|
碳素钢及合金钢螺母技术规范(米制)
|
Standard Specification for Carbon and Alloy Steel Nuts [Metric]
|
A564/A564M-04
|
热轧及冷精轧时效硬化处理过的不锈钢棒材和型材技术规范
|
Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
|
A565-03b
|
高温用马氏体不锈钢棒,锻件和锻制坯规格
|
Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
|
A568/A568M-03
|
热轧及冷轧高强度低合金碳素钢薄板
|
Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
|
A571/A571M-01
|
适用于低温压力容器零件的奥氏体球墨铸铁件
|
Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
|
A572/A572M-04
|
高强度低合金钴钒结构钢技术规范
|
Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
|
A573/A573M-00a
|
增强韧性的结构碳素钢板
|
Standard Specification for Structural Carbon Steel Plates of Improved Toughness
|
A574-04
|
合金钢内六角螺钉
|
Standard Specification for Alloy Steel Socket-Head Cap Screws
|
A574M-04
|
合金钢内六角螺钉(米制)
|
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
|
A575-96(2002)
|
商品级碳素钢棒(M级)
|
Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
|
A576-90b(2000)
|
特级热轧碳素钢棒
|
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
|
A577/A577M-90(2001)
|
钢板的超声角波束检验
|
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
|
A578/A578M-96(2001)
|
特殊设备用的普通钢板和包覆钢板的直波束超声探伤检验
|
Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
|
A579-04
|
超高强度合金钢锻件
|
Standard Specification for Superstrength Alloy Steel Forgings
|
A580/A580M-98
|
耐热不锈钢丝
|
Standard Specification for Stainless Steel Wire
|
A581/A581M-95b(2000)
|
高速切削用耐热不锈钢丝和盘条
|
Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
|
A582/A582M-95b(2000)e1
|
热轧或冷精轧的高速切削不锈及耐热钢棒
|
Standard Specification for Free-Machining Stainless Steel Bars
|
A586-98
|
镀锌平行和螺旋形钢丝绳
|
Standard Specification for Zinc-Coated Parallel and Helical Steel Wire
|